2002 Nissan Quest "replacing 2005 timing" Questions

when should get the timing belt changed.Is it 100000 Miles ? After a little research on this Van, I don't believe you have a timing belt you have a timing chain. Most timing chains last for the ...

...timing control solenoid valve uses oil flow to control timing, dirty oil can cause the valve to stuck open or close. Before replacing the valve, change engine oil and filter and reset engine

odometer numbers fade or disappear. It's time to either have the speedometer rebuilt or replaced. Check your local salvage yards and see if they have one in stock. Be sure to note mileage on and keep ...

...Timing chain could be making the sound if the Chain guide came free. My guess is you have a 7 - 70 warranty and they are trying to get out of rebuilding your engine. My 2005 Nissan Quest had a ...

...replacing on my 07 Nissan Quest that has 65,000 miles. I have never heard of one going out that soon. Does that sound correct and would that be under warrenty? They want $1600 to replace it. The ...

Automatic liftgate won't open When I use the key fob, or the interior open/close button, the liftgate opens about 1 inch, then 3 warning beeps, then closes and latches. However, if I pull the latch ...

rear detection devise is off and cannot be turned on does the light on the switch for the rear sonar stay on?my experience with these is nine times out of ten the small speaker located behind the ...

Can I replace the lift supports on my '05 nisaan quest myself? yes it is very easy, have the sales person at a parts store like Napa or Carquest show u how to release the spring clips that hold them ...

code P0113-P0183 I replaced whole new fuel pump, i clear is code, drove 50 miles after i toke my van for emission but it still failed still showing P0113-P0183, after replace fuel pump and FTS one ...

...replacing the tail light fuse will restore both the tail lights and the dash/interior lights. If this is not the case you may have to trace the wires and look for a broken or unplugged wire in the ...