1996 Nissan Altima "negative camber" Questions

it pulls prety good to the right its a 96 altima gxe Wheel negative camber, have alignment performed. brake caliper might be locked causing drag

negative camber on the front passenger side wheel No, you don't need 15 degrees of negative camber. Most typical specs for camber on the front of a car are between 0.0' and ~ -2.5'. Note: Cars with -2

...negative camber being too large? The front tires are wearing on the inside shoulder due to negative camber on the front. All other alignment specs are good. There appears to be no built in adjustment ...

negative camber Toyota cressida 1988.. my car has negative camber on passenger side front wheel and positive on front drivers side... mechanics say that there is no camber adjustment on this vehicle..

...20 bucks . If you are talking about the rear of the car,ride height makes a drastic change in camber. If the springs start to get weak the camber will go negative,spring spacers will correct

...negative camber leaning inward at the top. What is the most likely repair needed. Can I adjust the camber? camber is changed by moving the bolts the hold the strut to the knuckle find more that the ...

camber on 1977 rolls royce Front camber is off camber setting should be around 1 1/2 -2 degrees + if it is negative , check for worn king pins and bushes

negative camber my 1995 toyota celica gt appears to have negative camber. that is it leans inward at the wheel top. cannot determine any adjustments to correct this any help appreciated also i have no

...negative camber on 98 saturn sc1 how can i achieve more positive camber on rear Car was in minor wreck trying to get camber straightend out You need to do a 4 wheel alignment. You may have to replace ...

camber goes negative. Often the camber can be corrected with a coil spring spacer . You can tell if you were to put a jack under the center of the rear,take some weight off and you will see the camber