Where to put the timing marks on a 96' nissan 2.4 liter I found timing marks on the backside of the crankshaft pully and the mark on the front of the cam spocket.. Where do i put those marks.. Also ..
what is the correct belt placement(the belts connecting crankshaft pulley go water pump, alternater, etc on a 1987 300zx? the first one towards engine is power steering then alternator and water pump ...
...the timing belt, then align white lines on timing belt with matching mark on camshaft sprocket and crankshaft sprocket. Point arrow on timing belt towards the
? Just lining up the timing marks may not have worked if this is indeed what you did.If you had the crankshaft rotated 180 degrees, your motor would be trying to fire on the exhaust stroke, instead of
need to remove everything in front of the engine - including the fan, the serpentine belts, and the crankshaft pulley. The bolts for the water pump are located UNDER the timing cover, so getting these
...does not occur all the time - please help. sounds like you may have a problem with the camshaft or crankshaft positioning sensor. check the wiring to be sure it is not loose, a replacement are about ...
...i dont know what to do please help me I still think this is a timing problem, most likely with the crankshaft sensor. However, it could also be in the throttle positioning sensor, since you had ...
...will not hear the pistons hitting the valves. If the timing belt broke or the drive pulley on the crankshaft has sheared off then the engine is dead. I do not believe this engine is a 'free wheel" ...
...major engine problem. To determine if it is a major engine problem. Put a ratchet and socket on the crankshaft pully bolt and try to turn the motor by hand. If you can not rotate it then it would be ...
48 questions posted
Usually answered in minutes!
417 Questions
144 Questions
99 Questions
81 Questions
35 Questions