1995 Nissan Maxima "remove engine top contour" Questions

Ad

Question about Nissan Maxima

1 Answer

...engine does not fall down you also have to remove the axel on the driver side making sure you have jack stands and the car supported for safety but you can also go to auto zone and have them to print ...

Ad

...engine is cold first. Disconnect the cooling fan electrics. Remove the cowling fasteners if required Remove the bottom hose clamp Remove the top hose clamp Open the drain tap or simply remove the ...

Ad

Question about Nissan Maxima

2 Answers

...Engine (see Figures 1 through 6) Fig. 1: Remove the coolant recovery tank hose from the water outlet Fig. 2: Remove the upper radiator hose from the water outlet Fig. 3: Remove the three retaining ...

Question about Nissan Maxima

1 Answer

...at the thermostat block empty. No signs of leakage. Filled block and tank ran engine. Normal temp. Did observe top of radiator to be cold. The radiator could be plugged up from corrosion, due to

engine block, holding a spacer bar to the alternator; consult your manual for the location in your specific year of Ford Contour, as they vary. Remove the belt from the pulley.    

...remove the generator. Do not overstress or damage any hoses or cables. Lift the generator clear of the engine. Installation NOTE: To aid installation, push the sliding bushings flush with the ...

Question about Nissan Maxima

1 Answer

engine, unbolt from subframe, then lower subframe. I said bull. I merely cut the two bolts in the front and went to my local u-pull it for the 2 bolts. When I installed them, I went up from underneath

...remove an automatic transaxle transmission from the top on a 1998 4cylinder ford contour ? With care the motor and transmission can be removed through the top, allow for tilting the unit to clear the ...

Question about Nissan Maxima

1 Answer

engine, you remove the tensioner and bolt up the new one-then, thread the new belt (diagram is under the hood on a sticker) to all pulleys excert the very top one, and use a 1/2 drive rachett on the 1

Question about Nissan Maxima

2 Answers

...engine and it will have a pully bolted to it. There should be 4 bolts holding the pully on. remove these 4 bolts and the bolts holding the pump on will be exposed. remove those bolts as well(5-7) of ...

Not finding what you are looking for?
1995 Nissan Maxima Logo

1,542 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

2000 Nissan Maxima
2000 Nissan Maxima

1,309 Questions

1996 Nissan Maxima
1996 Nissan Maxima

1,007 Questions

1997 Nissan Maxima
1997 Nissan Maxima

857 Questions

2004 Nissan Maxima
2004 Nissan Maxima

783 Questions

2001 Nissan Maxima
2001 Nissan Maxima

480 Questions

Top Nissan Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...