...2005 use dot 3 and dot 4 brake fluid The standard brake fluid for your car is dot 3. This is the best for your car. Dot 4 is a higher standard brake fluid for newer car makes. I don't see any ...
Question about Nissan Altima
drove 2005 nissan altima 40miles on highway in 3rd gear...now trouble startjng car Takes 3 o 3 tries to start carr replace crank sensor located right rear engine block
...2005 nissan altima 1 First remove Both Positive and negitive battery terminals. wait atleast 3 minutes. 2 Remove front grille 3 Disconnect crash sensor Plug.Crash sensor is just below the hood latch. ...
2005 nissan altima 2.5 main bearing torque plz 2.5 L engine main bearing cap bolts Step 1 bolts1 through 10 - 27 to 31 ft-lbs Step 2 bolts 1 through 10 - Tighten additional 60 degrees Step 3 bolts 11 ...
...2005 Nissan Altima, using BRAND NEW cylinder head bolts:1 - Tighten in sequence (as pictured) to 37 ft-lbs.2 - Tighten an additional 60 degrees.3 - Loosen all bolts completely.4 - Tighten in sequence ...
...on a 2005 altima with a 3.5l It is located just under the starter and should be a 3 wire connector going into the bell housing. Let me know if you need a pic. You can email me at ...
...3 screws. Nissan 2005 Altima has double-din car receivers (twice the size of normal onces). You can replace the factory radio by the usual smaller receivers or the majestic double-din receivers. If ...
...change a breaklight bulb on my 2005 nissan altima Open the trunk and pull the carpet away look for 3 thumb nuts and remove the light lens assy. to take out the bulb from the back 1/4 turn pops it
...2005 Nissan Altima? first things you have to do to change nissan altima 2.5 alternator? 1- disconnect battery 2-from the top of alternator there will be 3 thing u have to open one is with bolt 12 mm ...
766 questions posted
Usually answered in minutes!
1,587 Questions
1,450 Questions
1,306 Questions
569 Questions
410 Questions
