1994 Nissan Quest "torque crankshaft main bearing caps" Questions

...torque at. i put a new crankshaft in the van and dont know what to torque the rods and mains at. thank you main bearing cap bolts: tighten them in three steps, in sequence, to 67-74 ft. lbs. (90-100 ...

crankshaft turns smoothly. Connecting rod cap bolts torque: Torque: 24.5 N·m (250 kgf·cm, 18 ft·lbf) Mark the front of the main bearing cap bolt with paint. Re tighten the main bearing cap bolts by 90

...crankshaft main bearings and rod bearings torque specks. 2 Different size engines for that year. If you have the 2.2 the main bearing caps are 70 ft/lbs (final torque) & the rod bearing caps are ...

TORQUE SPECIFICATIONS All readings in ft. lbs. Year Engine Displacement Liters Engine VIN Cylinder Head Bolts Main Bearing Bolts Rod Bearing Bolts Crankshaft Damper Bolts Flywheel Bolts Manifold Spark

...Torque Reading for Crankshaft Main Bearings: Depending on the engine model, year, and manufacturing standards, different torque values for the crankshaft main bearing caps may apply to the 1.4-liter ...

...Torque-to-Yield Fastener Caution. Tighten the 10?inner crankshaft bearing cap tie plate bolts in the sequence shown and to the following specifications: Tighten the inner crankshaft bearing cap tie ...

...TORQUE SPECS FOR CONNECTING ROD CAPS ON A 2004 2.3L FOCUS MOTOR? 2002 2.0L Duratech. Don't have 2004 2.3L NOTE: Use new connecting rod bearing cap bolts. NOTE: Do not fully tighten the connecting rod ...

crankshaft mains and connecting rod torque. Head bolts, 105-112 Foot pounds (Final torque) Final torque must be reached in 3 equal steps. Recheck final torque in sequence. Main Bearing Caps, Torque in

...torque the bearing caps to specification Fig. Fig. 4: Main bearing cap bolt tightening sequence on 3E and 3E-E engines Fit the upper bearings halves into the block and position the lower bearing ...

...torque for a 2000 Toyota Celicia GT the torques i need are Crankshaft Main Bearing, Connecting Rod Bearing Crank Main caps Tightening Torque For the 12 Pointed Head Bearing Cap Sub-Assembly Bolts ...