Question about Nissan Pathfinder
...? Should have B+ voltage with the ignition switch on . There is a ignition relay that supply's B+ to fuse #48 . Ignition relay and fuel pump relay or both located in the under hood fuse / relay box
Relay switch? Or ignition? Please help Check the ignition switch, and the wiring to the starter solenoid. Get someone to turn the key to the crank (start) position and check for voltage at the starter
How to do a ignition relay mod on a 1993 pathfinder There are so many mods to do on an ignition system that you are going to have to be more specific as to what you are trying to achieve.........
ignition is turned on, then to completely empty. could it be the fuel relay under the hood? It could be the fuel relay, but usually the fuel pump contacts wear out and dont carry current through them.
Question about Nissan Pathfinder
...relay, fuel injectors, ignition control module, and wiring harness. Additionally, it would be beneficial to check the fuel pressure regulator and clean the fuel injectors. If these steps do not ...
ignition switch have both been replaced with no effect. I cannot seem to find the clutch switch on the floor/firewall or on the clutch bracket itself nor have I been able to identify the clutch relay.
ive went thu all the relays an fuses an every thing is good but no power to dash or starter. theres a good possibility that the ignition switch has failed. Just a hunch, but I would start by tracking ...
Question about Nissan Pathfinder
...Ignition Relay but can't find it in either fuse box. Where is it? Ignition is run from different relays. PCM,ASD. Come to mind. There can be several ignition fuses and several for the PCM. Best to ...
...ignition. any ideas The fuel pump relay has to be checked.Usually, when this relay fails it gets stuck in the on position, allowing the fuel pump to continue running even though the car is turned ...
Question about Nissan Pathfinder
...ignition key. If there is power, the relay is bad. If there is no power, the starter circuit is suspect. Step 4 Check to see if there is power to the neutral safety switch if there is no power at the ...
415 questions posted
Usually answered in minutes!
716 Questions
599 Questions
586 Questions
405 Questions
397 Questions