1994 Nissan Maxima "ignition timing 2" Questions

Ad

...2 buy a new ignition switch which is easy to remove and to install a new 1. This happened 2 me & I went thru 2 of these switches so the 3rd one is in there now. It would start sometimes & ...

Ad

...timing chain 9. Ignition components damp or damaged. 10. Broken, loose or disconnected wires at hte ignition coils or faulty coils. 11. Defective MAF sensor. 12. Worn, faulty or incorrectly gapped ...

Ad

Question about Nissan Maxima

3 Answers

...2. As soon as the Airbag light turns off - turn the ignition to OFF position and count 5-Mississippi's (that's 5-seconds). 3. Then turn ignition back to 'ON' Position and repeat step 1 & 2 again. ...

...2. Make sure you have power on the field terminal of the alternator when the switch is on. If you have power, remove the alternator and have it tested and replace if necessary. There is a problem in ...

Question about Nissan Maxima

1 Answer

...Ignition timing 2. Problem with fuel injection system 3. Emission control system not functioning properly 4. Low or uneven cylinder compression pressure 5.Obstructed exhaust system. 6. Fuel filter ...

...2 and sometimes it trimble when i stop , check engine light keep coming on and off some times Here are the resons for this fault code to set.Possible causes- Intake air leaks - Faulty front heated ...

Question about Nissan Maxima

1 Answer

...ignition coil...if no spark present ,could be crank sensor faulty(located on the side housing of the timing belt) or the knock sensor located the same side at the bottom below large belt

Question about Nissan Maxima

1 Answer

...2. Install the spark plug to the ignition coil/coil pack, then attach the coil wiring. 3. Ground the plug at a good ground location on the engine. 4. Crank the engine and check for spark. 5. If spark ...

...ignition timing ? It should be for manual transmission 20+/- 2 deg BTDC automatic transmission 20+/- deg BTDC FYI---One time i dropped a new plug before i put it in and did not realize that the gap ...

Question about Nissan Maxima

1 Answer

...2. Place the ignition switch in the OFF or LOCK position and wait approximately 10 seconds.3. Repeat steps 1 and 2.4. Restart the engine while holding the device (which may have caused the ...

Not finding what you are looking for?
1994 Nissan Maxima Logo

383 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

2000 Nissan Maxima
2000 Nissan Maxima

1,309 Questions

1995 Nissan Maxima
1995 Nissan Maxima

1,122 Questions

1996 Nissan Maxima
1996 Nissan Maxima

1,007 Questions

1997 Nissan Maxima
1997 Nissan Maxima

857 Questions

2004 Nissan Maxima
2004 Nissan Maxima

783 Questions

Top Nissan Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...