1994 Nissan Altima "knock problems sensor" Questions

knock sensor error and one pending just after clearing the codes before the engine was started. Does this consistantly every time. I would suggest that you check your knock sensor circuits to find out

...knock sensor on 1997 altima The knock sensor is in the engine block under the intake manifold near the oil filter. The knock sensor is on the firewall side of the engine. It's hidden below the ...

knock sensor is messed up..but the mechanic said that the problem is the torque converter..I thought he was trying to play me so I took myy car out..was I rite to do so..or was he correct..??? well it

...knock sensor malfunction. p0303 and p0325 - i can see these working together, if a cylinder misfires, it will cause the knock sensor to trip. I would lean towards the coil and or ignition module, ...

...knock sensor showing up. Do the knock sensor needs replaced? I have read a couple blogs and they said to use a higher fuel grade. Could you help me so that this problem can be corrected? get an odb2 ...

...(low rpm). Is it an emmission problem? EGR valve or sensor? Knock sensor? vacuum issue? change ur Airflow sensor buddy. thats the only problem. And if yet it doesnt work then check ur crank

...knock sensor located in my 97 altima gxe The problem. My car starts then it like the rpm jump up or down then it stutters and turn off, when I step on the gas it act like am not then it catches then ...

...knock sensor install on a 99 Altima it still want star it turns over but nothing any clues as to why That was a waste of time. The knock sensor's only function is to sense spark knock or internal ...

...knock sensor on a 1996 Nissan Altima GXE engine? The knock sensor is underneath the intake manifold on the rear of the engine. If you got an engine check code from Autozone or some other goof ball ...

...knock sensor....codes were cleared again and now reading exhaust gas thing? What is real problem before I throw $ into something it's not Take to Nissan Dealer,they will get it right and won't cost ...