1993 Nissan Altima "valve cover" Questions

valve cover gasket leaking How to replace the valve cover gasket and spark plug well gasket , if there is oil leakage around the plugs and inside the plug wells When you buy the valve cover set, it ...

...valve cover have to be replaced? Yes, you need a Rocker cover (valve cover) Gasket kit. Remove the valve cover, remove all old O-rings and cover gasket, clean grooves and mating surfaces without ...

...valve cover on a 2002 Altima 2.5L have to be replace if the spark plug seals are bad No you do not have to replace the valve cover, you however to need to replace the spark plug ring seals. You can ...

...to access the PCV valve. One side of the PCV Valve screws into the Valve Cover, and the other side has a rubber hose connected to the air intake. It is located on the right side of the valve

valve cover and if so, what else needs to be changed? O-rings, gaskets? Is there a torque setting for the valve cover? Well i wouldent of thought you need to take off the valve cover AKA (rocker cover

...valve cover if you do not know what the valve cover is it is were you put the engine oil into the car. there are 2 covers on has the deal to add the engine oil and the other one looks just like it ...

VALVE COVER OR PLUG TOP SEAL WOULD CAUSE THIS...CAR DOES NOT LEAK OR BURN OIL AT ALL I would try snugging down all the valve cover bolts before replacing anything. A valve cover gasket kit should have

clanging sound under valve cover at high rpm's clanging sound under valve cover at high rpm's your vechicle requires valve clearance check and adjustment at 60000 miles intervals.

...valve cover torque sequence for a 2000 nissan altima i need to know this so i could properly tighten the valve cover to stop a gas leak that i have, oh and i also need the pressure or something like ...

#160;valve cover  and  air tube If you look straight down from the valve cover  you can see a black wire have a green top on connected to a sensor . good luck .