Question about Nissan Altima
...size post (terminals) on the solenoid ,one large & one small . It should be self explanatory. What relay switch ? No relay for the starter on that vehicle. Your best, have a qualified repair shop ...
...need to change a mercury grand marquis starter Should be under the engine on the passenger side of the engine right next to the transmission. It is about the size of large size juice can, is normally ...
...Need instructions on how to change a starter on a 2000 nissan maxima. Just went out today. Firts disconnect battery. Remoce air filter box. You will see the starter right under neith the air box. You ...
...what size socket you need and put the socket on an extension and to reinstall the top bolt you may have to use electrical tape to tape the bolt into the socket I had the same problem with an ...
size. Call your dealership to find out what starter you need. Your local auto parts store then can get you the right one. You can change this yourself. It takes about 45 minutes for a beginner. If you
...to change starter 1993 nissan altima what size sockets or anything else do i need A Basic METRIC Socket set AND Combo Wrench set Will Do The JOB i cant start my 93 nissan altima all i hear is ...
...size and type. I'm portly and usually need to lift things up a bit to fit underneath ( - I'm not fat I'm just getting old!! ) It also depends on your level of ability. No specialty tools are needed ...
Question about Cars & Trucks
...size of engine, you will need a variety of shims to set the distance between the two correctly. (which you already have experience at). But it is important you have the correct starter because the ...
...change, I already have a new starter to be put in, also can you tell me if I need any special tools. no special tools needed use a 1/2 inch or a 9/16 wrench for bolts but rule # 1 before you work on ...
Question about Nissan Altima
...change the starter on my 94 olds. Do I need special tools? I can't get to the second mounting bolt. Since its right there at the front of the motor, you really only need a simple ratchet and ...
539 questions posted
Usually answered in minutes!
1,587 Questions
1,450 Questions
1,306 Questions
569 Questions
534 Questions