1993 Nissan 240SX "front turn signals working" Questions

blinkers dont work even after replacing front lights but hazard lights work Replace the turn signal flasher mounted under the dash, drivers side, passenger side of steering column on support bracket.

...at the brake lights and turn signal lights. If there is uneven current draw on the circuits, the lights in front could be getting some of the power. Brake lights get the most power in the rear

...works front and rear. Left turn signal works in rear but not in the front Replace the bulb I feel you have a burnt out bulb on the front left. Hello Ted, I think you have a bad front turn signal

...front turn signal does not blink. front driver front turn signal does not blink. rear blinks rapidly, signaling front problem. Changed bulb did not work. light comes on when switched on but does not ...

...TURN SIGNAL - left front signal operates properly. Left rear does not operate RIGHT TURN SIGNAL - right front signal does not operate. Both left and right signals blink together Dash turn signal ...

...front turn signals to work? What wires have to be connected together for my turn signal and side corner marker to work? All bulbs are new, the front driver-side turn signal works fine but the corner ...

...front and rear turn signals don't work but the left front and rear signals do work. It is the same with the hazards-the right side of the car doesn't work while the left side works. the flasher relay ...

...front turn signals stopped working whats the problem I have checked all fuses and they are good. The front turn signals do not work. The rear turn signal do work and flash real fast. front bulbs are ...

...Front Turn Signal Circuit When the turn signal switch is placed in the left turn position, the body control module (BCM) cycles positive voltage ON and OFF to the LF turn signal lamp through the left ...

...front turn signals work rear parking lights work brake lights work In the diagram for rear lamp, the top wires are voltage, the bottom black wire is ground. The brown wire on either side should be ...