1991 Nissan Pathfinder "timing marks" Questions

...marks, make sure they are aligned with the alignment, (Punchmark), on the Timing Upper Rear Cover. Count the teeth in the timing belt. There should be 133 teeth on the belt. There is 43 teeth ...

timing marks and aligning timing belt i changed water pump on 1995 nissan pathfinder had to remove idler pully on timing belt i think the timing belt jumped a tooth when i reinstalled need to know ...

marks on the rear timing cover. There should also be a similar dimple on the crankshaft timing sprocket. These will align with their respective marks when the engine is at TDC. The alignment marks are

timing marks are not lining up when turning over the eng the timing chain is not lining up when I go to turn over the eng Timing belt or chain? If you have chain align the dark mark of the chain to ...

timing marks for 1998 nissan pathfinder i had to replace water pump,and doing so required me to disconnect timing belt,but my son got ahead of me and didnt mark or set the timing marks on dead center ...

...timing marks on the belt move over a few teeth off the camshaft gear marks and no longer line up. I'm using a Haynes manual for this, but am I missing something that they don't say in the book? the ...

timing marks in increments of 5 degress per mark. The correct timing for a 1988 V6 engine is 12 degrees BTDC (Before Top Dead Center) + or - 2 Degress (Strive for 12). You can then attached the timing

timing belt and gears. make sure to mark it so you know what marks are for what cam and crank. and which direction it goes. then on the new belt crefully transfer the marks. then it goes really smooth

...timing belt. I marked the old one, but I want to replace it...Where do I need to set marks for replacement? I see 3r and 3l on the cams, but no mark on the crank? There's a circular stamp on the ...

...timing marks made on to the belt...basically it is idiot proof.... there is a mark on each of the 3 gears......looking from the front of the engine the mark on the cam gear on the left will be at ...