...road accessory shop there out there. genuine one,s cost an arm and leg to fit as axle,s need to be ...
...glove box and floor area. there will be a heater resisitor, 4 wires usually. 2 or 3 screws when removed you'll see lil coils.3 or 4 ....thats whole thing needs replacing. Ask for a heater
remove 2 screws, unplug wire, that was all there was to fixing it. this is usually referred to as multifunction switch. As it runs turn signals high beams and so forth. The headlights are on there two
...driving yesterday and the anti-lock indicator light went on and my brake lights are stuck on. I removed the fuse so the battery doesn't die, but what could be wrong? thanks. Change the brake
...remove the stereo entirely. Then you can check the connectors and the wiring in the console for any obvious problems. 2) You didn't say which speaker quit working, but if the a/c guys had anything to ...
...remove wiring connected to mass air flow sensor 96 Nissan pathfinder There is a spring clip in the connector if that is what you mean. You need help at a repair shop, or ask a friend that knows ...
...remove the front rotors of my 1997 nissan pathfinder? here's a good instructional video on replacing the rotors... any more information you need feel free to ask. ...
Question about Nissan Pathfinder
...a good auto transmission repair for less than about £1200 Sterling when the transmission must be removed. That would make your quotation seem about right, though the "at least" part represents ...
...there are two sensors, one for each cylinder bank and often times intake manifolds must be removed to access them. Possibly the info could be found at Autozone.com. You will be able to enter ...
...remove belt and see if tensioner moves freely or stays where you stop it at (they are difficult to mave anyway due to large spring on backside but you might be able to tell if not take it in and have ...
262 questions posted
Usually answered in minutes!
716 Questions
599 Questions
586 Questions
405 Questions
397 Questions