1990 Nissan Pathfinder "brake spoon" Questions

...brake spoon. Chock the front wheels, jack the rear of the vehicle up, and on the back side of the wheel/tire/drum assembly, you will see at the top a rubber stopper, remove it, and then you will be ...

...brake spoon or by backing up at 15mph and hitting the brakes hard, because most have auto ajusters that ratchet up when you back up and hit the brakes. if that doesn't work, take it to a brake shop ...

brake spoon and a thin 4" screw driver, if you don't have a brake spoon, another screwdriver will do. In the front of the adj. wheel is the adjuster bar, it's job is to keep the adj wheel from turning

...brake spoon into adjust and i can't see or feel the adjuster wheel. I can not feel the adjuster or see one...??? I think if the self adjusters are working properly you should be able to push the ...

...light was lit because her brakes needed maintenance and did not fill the almost empty brake res. My question is should i cut his nuts off with pruning shears or a butter knife ? How about a

brake spoon to loosen the left rear drum brake? Which ever way is hard to turn that's the way, get a flash light and look in there, there will be a tap that needs to be push away from adjuster, with a

brake spoon to de adjust the rear shoes by turning the brake spoon up ..if u dont have the oval hole u will need to cut it out of the backing plate there may be 2 oval stamps in the backing plate, cut

brake spoon from behind the drum you will see a rubber plug . Pull t of and use a brake spoon to open the drum shoes until they just start lightly rubbing. Once you have achieved that? You are all set

...brake spoon on the lower part of the back plate is a plug [or a metal plug indentation that need to remove ] insert spoon and adjust by moving the adjustment star to spread the shoes a little at a ...