...would this be a Solenoid Switch problem? no ... the bearings are failing around the armature inside the starter causing it to ground out against case the power needed to light it...replace ...
Question about Nissan Hardbody
light switch (location pedal) unplug the switch & bridge the wires & if the brake lights come on the switch is faulty. all you are doing by bridgeing the wires is bypassing the switch. What is
...and u see a dark spot in the beam then its that light but replace them both anyways not expensive at all.. many possible solutions Check and/or replace -fuse -dimmer switch -head light switch ...
...light switch. Pull the switch to turn the parking lights on. Then rotate the knob to bring the instrument lights on, continue rotation of the knob to bring the dome light on. Be sure to turn dome ...
replacing the key helped for a short time but the new contacts wore the switch down faster then it too needed to be replaced. $200! 95 chevy camaro with pass key will not start. Security light goes on
...switch. The 95 had a poorly designed wire and plug configuration going into the switch. The wiring was too small and the plug would literally melt. The headlight switch and plug has to be replaced in ...
Question about Cars & Trucks
...rear lights have emer flashers have all front lights. I have replaced light switch and c/b on fender well no lights try your brake light switch, this is usually located at the top of the brake
Question about Cars & Trucks
...light fuse blows immediately when lights are turned on. new switch, didnt help. Have a friend with a 95 chevy truck that does the same. Is this a common issue? Try replacing the bulbs, but if you've ...
Question about Nissan Hardbody
... the head light switch knob should come out. you may have to pull it out first before u take the cover off. then remove the old switch and disconect the wires then replace the switch. i hope this ...
...light switch, because I still had dash lights. Want to take out, bypass light/ dimmer switch, and power head lights. OMG. sounds like you have issues. One of the wires must have rubbed through to ...
185 questions posted
Usually answered in minutes!
21 Questions
15 Questions
2 Questions
106 Questions