1989 Nissan Sentra 4 Door "apart outer cv joint" Questions

Ad

how do I get the outer cv joint apart on a 89 nissan sentra to put on a new boot? u r better off buyin a rebuilt axle its cheap and comes with it and its less of a headache

Ad

...outer cv joint hub connection. need to know is there any other snap rings to remove in order for me to remove cv joint besides separating the ball joint and the thrugh bolt that holds the ball joint ...

Ad

...apart when I tried to remove it You need to get two small pry bars that will get behind the CV joint and pry both sides at once. Or you can clamp a slide hammer onto the outer edge of the CV cup and ...

...outer cv joint come apart on a 1992 lexus es300 you have to take the boot off. clean off all the grease. there is a snap ring holding the cv joint to the axle. release the snap ring and joint will ...

outer joint or the complete assembly. There are alternative types of joints that could be used - the Hardy Spicer type for instance, which must be "timed" with it's opposite number at the other end of

Question about Nissan Sentra

1 Answer

...your outer cv joint boot and see if it is severely torn. It sounds like the cv joint is about to come apart, especially if you notice the noice being more pronounce when turning one way or

...outer cv were rebuildable on later models. I dont want to rebuild them just replace the outers as they had torn boots and are rattleing some. Thank you in advance. Ben First, did you check the price ...

Question about Nissan Sentra

1 Answer

apart on my 1997 cavalier. it has no lower retention ring please help If you are changing the CV joint with shaft, after getting the outer end of the shaft out of the hub, Take a small pry-bar and pry

Question about Nissan Sentra

1 Answer

outer) joint, they are pretty simple, but if you take the joint itself apart you risk losing lots of needle bearings. If it is a plunging rezeppa (inner) joint, be even more careful as they come apart

Question about Nissan Sentra

1 Answer

...apart over time. If you see CV grease all over the under carriage of the care then you will need new boots or replace CV joints. Inner and outer wheel bearings can also make noise when they are about ...

Not finding what you are looking for?
Cars & Trucks Logo

121 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Nissan Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...