removing the head light from a 1997 pathfinder How do I replace the drivers side head light glass I replace my head light bulbs recently and it was easy. I think that you might have to replace the ...
Hi i'm eduardo and i have a '94 nissan pathfinder 4wd...engine 3.0.... i want to know the head torque specifications . Hi Eduardo: Check this information (click over pics for zoom)... Fig. 20: ...
Question about Nissan Pathfinder
2002 Nissan Pathfinder, leak cylinder head and above exhaust Put engine back together and it is leaking at the cylinder head and above the exhaust, where did I go wrong?? Leaks are usually attibuted ...
Question about Nissan Pathfinder
what all years will cylinder heads fit a 1994 pathfinder 3.0 V6? heading to savage yard. need to know what all years match. Cylinder heads for a DOHC 3.0 V6 1994 Nissan Pathfinder. The salvage yard ...
cam bearings right head 1994 pathfinder the cam has froze up. distroyed the timing belt at the 6 O'clock position Therefore I believe the cam bearing/s had to have seized up. can I change the bearings
right head cam seized up is it possible to change the cam bearings after removing the valve cover to fix the problem?? overhead cam heads do not usually have cam bearings. If your cam has seized, it ...
leaking coolant from head gasket area and valve leaking coolant from head gasket area and oil from valve covers 1998 Nissan Pathfinder 6 cyl 2-wheel, 136,000 Well the head gasket job will cover the ...
Tail/head lights do not work? Hello: We have a 1989 Nissan Pathfinder and the tail/head lights do not work? Any ideas/suggestions?? Check the bulbs for burnt filaments. Take a multimeter and test your
Question about Nissan Pathfinder
I replaced my head gaskets on my 2004 Nissan pathfinder I put new timing chains and followed the steps on setting the timing engine starts but has no power and will not rev over 3000 rpm Here's a link
head gasket failure on Nissan Pathfinder Hello! I have Nissan Pathfinder 1989 with Z24 engine. It blows head gasket every 3000 km. (8 months). It was twice replaced along with head finish. Any idea ...
132 questions posted
Usually answered in minutes!
716 Questions
599 Questions
586 Questions
405 Questions
397 Questions