1988 Nissan Pulsar "water pump bolt patterns" Questions

...water pump When replacing a water pump, it is necessary to drain the cooling system. Any components--belts, fan, fan shroud, shaft spacers, or viscous drive clutch--should be removed to make the pump ...

...water pump im needing to know if the internal water pump on a 96 intrepid is a 5 bolt or a 3 bolt pattern Really depends on the engine you have. If you have a 3.3 L engine then the water pump is a 5 ...

...water pump Replace water pump. Drain coolant from radiator,remove fan,belt,pulley,all hoses connected to the water pump,remove water pump bolts,remove water pump, clean surface of engine block where ...

...water pump. how easy it it? Pretty easy. Just drain antifreeze. Then loosen 4 bolts that holds fan to pulley. Remove plastic fan schroud and fan pulley. Loosen water pump bolts in criss cross pattern ...

...water pump on a 2006 dodge ram 318 or 360 engine? well, the removal procedure is about the same on both, remove fan and belts first, then remove the water pump, be careful not to damage the radiator, ...

...water pump. need to pull pulley off power steering pump. i have a puller but there is not enough room to use it. what solution do you have to get pulley or water pump off ? I replaced Intake Manifold ...

water pump on 2000 buick lesabre, 6 cylinder engine I assume you have a 3800 V6 motor in that model car. When standing with the hood open on the passenger side of the car, the water pump is located in

1995 Ford Taurus 3.8 L V6 timing chain cover, and water pump diagram Bolt pattern for 95, Taurus 3.8 L V6 timing chain water pump tc-cover-jpg.215529 (235×300) (taurusclub.com)

...water pump Rear Wheel Drive: 1. Open the radiator petcock and the engine drain plug on the passenger's side. Drain the cooling system. Disconnect the battery ground (negative) cable. Remove all drive ...

water pump in my 86 Jetta diesel. I took a water pump off a 86 jetta (gas engine). I am having trouble getting to the top 2 bolts on the water pump. How can I get to those 2 bolts? Thanks, Mark I dont