1988 Nissan Pulsar "aligning marks cam gear" Questions

type of motor so please choose the correct one for your application. Valve timing alignment marks ? E-Series engines Valve timing alignment marks ? CA16DE and CA18DE engines CA18DE double overhead cam

cam with the crang how do you align the timing marks up on a 1995 saturn L series 1.9. Align the chain with the colored links on the chain over the marks on the cams.Twin cams Have a small hole on the

...marks on the cam gears and crankshaft are aligned properly. Both cam gears have an "I" and an "E" mark on them. The Intake Cam should be aligned with the "I" pointed straight up and the Exhaust Cam ...

...marks. NOTE When aligning the cam pulleys with the seal plate marks, align the left cam pulley ?I? mark and the right cam pulley on the ?E? mark. WARNING When aligning the timing marks, do not turn ...

...marks, make sure they are aligned with the alignment, (Punchmark), on the Timing Upper Rear Cover. Count the teeth in the timing belt. There should be 133 teeth on the belt. There is 43 teeth ...

marks on crank shaft gear arrow to arrow, the front cam gear the mark goes to the middle on the rear cam gear the mark goes one notch below front gear mark they line up when the tension is put on belt

aligning the marks and putting your timing belt on, turn the engine 2 complete turns to insure the marks are still aligned; As long as the marks still align, you're done. I hope this helps you, and if

cam gear timing marks should be alines across from one another. The right cam gear is the intake side and the left side is the exhaust side. After removing the belt turn the exhaust cam down 1/2 notch

marks on cam shaft pulley on mazda protege 2002 1. Remove all spark plugs so that the crank shaft could be rotated easily. 2. Rotate the crankshaft to align the timing mark of the crankshaft gear with

...marks on the cam gears align with the timing marks in the rear timing cover. The timing mark on the crank gear aligns with the timing mark on the oil pump assembly. The tensioner is set by rotating ...