1987 Nissan Pathfinder "remove fuel return line injector" Questions

...fuel return line is removed from the fuel injection pressure regulator, it starts and runs and will rev although I've got another tube on it and fuel is draining in a container. Do you think the ...

...REMOVE FUEL RETURN LINE FROM INJECTOR, REMOVE FUEL INJECTOR HIGH PRESSURE LINE, REMOVE FUEL INJECTOR RETAINER AND RETAINING BOLT,THEN REMOVE FUEL INJECTOR FROM THE CYLINDER HEAD. YOU NEED A FUEL ...

...on after you remove presure fuel line if no deliver replace fuel pump .if there is fuel fix back and try close return fuel line temporary ( to make high presure and sure return control valve is ok

remove bolts on fuel rail. Complete fuel rail assembly will come out with injectors,then you will have to remove injectors from fuel rail. -------- With new fuel injectors use new O-ring.Don't use

remove the fuel rail bolted to the intake manifold. There maybe a clip holding on the injector. Spraying some WD-40 on the ends of the injectors to aid removal, also when installing, spray some on the

fuel gallery in head. rocker cover, injector rail, injectors need removing and injector sleeves need replacing as well as O rings and seats. a special tool is needed to remove the injector sleeves out

...remove the fuel injectors in a 1988 bronco with a 351? Remove the upper intake manifold. Be sure to depressurize the fuel system before disconnecting any fuel lines. Disconnect the fuel supply and ...

...Remove the fuel rail mounting bolts. (9)Remove the fuel rail and the fuel injectors as a single assembly. (10)Remove the fuel injectors one by one,by flipping up the U-clip retainer then pulling the ...

...remove the fuel tank cap to release fuel tank pressure. Remove the fuel pump relay from the PDC. Start the engine and allow it to run until it stops. Select any injector and unplug its connector. ...

remove return fuel line,dont lose copper washers,put special fuel bolts back in top of injector firm[by hand] undo holding down bolts evenly,undo fully injector pipe nut,.gently pry injector loose,and