1986 Nissan King Cab "timing gear chain harmonic balancer" Questions

...gear and destroy the two gears or cause engine lockup. Before installing timing cover, inspect coolant and oil passages. If there is excessive buildup, a good system cleaner is recommended. Replace ...

...bolt and line up timing marks. cylinder #1 at top dead center and valves for cylinder #1 closed. remove harmonic balancer bolt and remove cam gear bolts and crankshaft gear, install is reverse

timing tab,pull the balancer back off and slip the chain on the crank gear after finding the single dot on the chain.Set the mark on the cam gear at very top and put the chain mark on that mark on the

...pump take timing chain cover off should be either 7/16 or 1/2 socket remove top timing chain not gear yet line up dots bottom gear dot at 12 oclock top gear at 6 oclock then remove gears and ...

...timing chain making a lot of noise behind the harmonic balancer and check engine light code p0305 Timing gears wear and the chain stretches with time. p0305 means cylinder #5 has a misfire.It'd ...

timing gear issue that GM had (neoprine coating on gears)? Crank sensor is hitting balancer. One of the interupter blades may be bent. 3800's do not have timing chain or gear problems. Now a 3.8 will.

...gear inside the timing cover. If you have replaced the crankshaft sensor and this is causing a timing issue, the mount is slotted and determines the distance from the the crankshaft which can alter ...

...to hold the camshaft gear with chain on it. Suspending it with wire to keep the chain from moving the timing (do not let the chain relax as it will come off the crankshaft gear and change the

...timing chain cover? remover the serpentine belt.  Remove the water pump noting were each bolt came from for they are different in length. remove any hoses attach if there. Some models have hoses ...

...it is easy to replace, passenger side of engine on or near timing chain housing, however, if the cam sensor magnet is weak it too must be replaced, which involves removing the timing gear and ...