1984 Nissan 300ZX "harness" Questions

what would cause the transmision wiring harness to be melted by the exhaust? Exhaust get's very hot, might be missing the heat shield, to protect the harness.

86 nissan zx tail lights and marker lights wont work sounds like rear harness ground wire is loose or cut, look for small single wire coming out of tailight harness , goes to body with a screw.

...The switch is located under the dash, mounted to the arm of the brake pedal. There is also a wire harness connected to the switch - try unplugging that harness, then check if the brake lights are ...

how do i bypass my factory amp in my 1986 nissan 300zx i got the right harness for my aftermarket cd player. power turns on but no sound comes out of the speakers but they worked fine with the stock ...

...intate ,but on the throttle position switch it has 3 wires from plug but i can only find 2 from the harness to the plug were dose the 3rd come from This is a classic symptom of a bad mass airflow ...

my right side low beam light does not work. The light is new. Check the wiring harness for bad connection. Very easy to fix. ok replace the bulb it worked for me!

my 1993 nissan 300zx will not go past 2500 rpms and it bucks brand new engine harness.brand new timing belt.the car wont go past 60miles an hour and it wont go past 2500rpms when driving,and it bucks ...

...WHEN LIGHTS ARE TURNED ON. I CHANGED THE BULBS AND STILL WON'T TURN ON. PLEASE HELP. Check the wire harness and pay attention to the ground wire, it may have broke due to corrosion being out in the ...

i need a wiring harness diagram. am trying to straighten out last owners rats nest. they changed motors and apparently made things up as they went along. nothing is where its supposed to be and ...