1983 Nissan 280ZX "replace screws ignition module" Questions

Ad

...replace it if the reading is far from this range. If the power supply, circuits, wiring and coil are in good shape, check the IC unit and pick-up coil as follows: Turn the ignition OFF. Remove the ...

Ad

...replace the PCM (Powertrain Control Module)in my 1994 Fodr thunderbird 3.8L V6 without/supercharger ..Is this is Big job for a backyard mechanic and how long should it take, my real question is, easy ...

Ad

Question about Nissan Z

2 Answers

screws. Take note of the location of each wire, and unscrew each one. The ignition module can be unscrewed with a phillips head screw driver, and removed. When fitting the replacement module, you must

...it over), pull rotor straight off shaft. Replace new rotor on shaft. Rotor should go onto shaft in only one direction. Replace distributor car and tighten screws. Any other questions, please

...screws. Remove the ICM from the ignition coil housing. To install: Install the ignition control module in the ignition coil housing. Install the ICM retaining screws. Tighten the retaining screws. ...

Question about Nissan Z

3 Answers

screws. Take note of the location of each wire, and unscrew each one. The ignition module can be unscrewed with a phillips head screw driver, and removed. When fitting the replacement module, you must

Question about Nissan Z

2 Answers

...screws go way inside the body of the TFI module and standard sockets will not fit into the hole far enough to get onto the head of the screw. It is not real expensive. You are looking at maybe less ...

...replace ignition ignitor in 1993honda civvi The igniter unit is called the Ignition Control Module (ICM) for 1993-'95 models but is the same part. 1. Disconnect negative battery cable. 2. Remove ...

...replace ignition control module took of plastic panel under steering column but can't remove metal panel behind pastic one. removed two visable screws but still won't come off. what's up with that? ...

...screws are missing. Then get the dielectric grease and put a coat on the bottom of the module, this dissipates heat and if not put on will burn the module up then replace all parts in reverse order. ...

Not finding what you are looking for?
Cars & Trucks Logo

204 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

2006 Nissan Z
2006 Nissan Z

21 Questions

2008 Nissan Z
2008 Nissan Z

2 Questions

Top Nissan Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...