1986 Mercedes-Benz 300 "rocker arm installation instructions" Questions

...rocker arms. Remove the valve covers and look to see if there are adjusting nuts on top of them. If so, get a shop manual and a feeler gague and a couple of wrenches and screwdriver and follow ...

Rocker Arm Installation 1998 Dodge 5.9 360. locate v8 on crankshaft damper(147 degrees ATDC). rotate engine until v8 lines up with TDC mark on timing cover. install rocker arm and pivot assemblies and

1991 acura integra 1.8 installing cams and rocker arms need instructions In this link could find interesting information: Camshafts and Rocker ShaftsHope this helps. 

rocker arms they are not sitting in the same place as before. If the push rods get out of order, how do you correct this, or do you just install a new set of push rods? Really loud tapping, I am going

...rocker arm cover. Remove the cylinder head assembly from the engine. Remove the bolts retaining the lifter anti-rotation brackets, then remove the brackets. Remove the hydraulic roller lifters from ...

...rocker arm shaft retaining bolts. The rocker arm shaft bolts MUST be loosened so that the correct belt tension can be obtained. Install the tensioner and the return spring. Using a hexagon wrench, ...

...rocker arm screw with a very slight drag. Insert the feeler gauge straight, not at an angle. If the clearance is not within the specified value, loosen the rocker arm lock nut and turn the rocker arm ...

rocker arm strip, loose, or breaking I have had several rocker bolt holes strip on these, buying a helicoil kit seems to hold good but I prefer to install a steel insert, either kit with instructions ...