1986 Mercedes-Benz 190 "sunroof tilt side" Questions

Sunroof problem Merc 190e 1986 Model Good day folks Please assist me on how to remove and replace the sun roof on my 190e Merc 1986 model . The thing has failed and I need to repair it. Do you have a ...

...Sunroof will tilt, does not close all the way, will not Today I tried to open my sunroof and it made a kind of thump noise, then I noticed that it will not open all the way, it will open to the tilt, ...

...Sunroof won't close unless I tap the button manually, one tap at a time. I've been advised that it needs to be reset as it's lost its memory. To reset the moonroof one-touch operation: With ignition ...

...tilt option again.by this time the electric motor came to life but to my disappointment the sunroof would only close on the left hand side of the car making a clicking noise when it got stuck,i got ...

...sunroof. It does not close properly on one side and it does not open (tilt function) on that same side. Ho to solve this? It has a broken slide rail and this will need to be replaced. It is a common ...

...sunroof tilt switch in the forward (up) position until the sunroof is fully vented (tilted up) position. It should at that point operate normally. Should those two suggestions not solve your problem, ...

tilt only opens the left side while the right side seems to remain closed. Any suggestions as to what the problem may be, motor, switch, raise arm disconnect? Ken Price - [email protected] Ok Ken.

Tilt up the sunroof lid. Remove the lid side trim. Remove the lid bolts and the lid assembly. Remove the rear drain mount screws and the drain. Remove the shade assembly holders from the sunroof frame

side but not the right. What should i do to get this thing fixed or at least closed SOUNDS LIKE RT GUIDE CABLE IS BROKEN OR STRIPPED IF YOU DO NOT HAVE ANY EXPERIENCE WITH SUNROOF REPAIR YOU REALLY DO

tilt arm was broken. I got a new sunroof assembly and pretty much have it installed, but the glass was in the wrong position for the screws, so I attached the motor and it would only tilt up and down.