code po650, po332,p1875 comes on what do they mean exactly,whats wrong CODE PO650 MALFUNCTION INDICATOR LAMP CIRCUIT MALFUNCTION CONDITIONS. POSSIBLE CAUSES MIL CONTROL CIRCUIT IS OPEN , SHORTED TO ...
...transmission that tell the it when to shift. These are known to go bad in 4L60E transmissions. A quick check for a simple possibility is the plug going to the transmission. It will be located under ...
...4L60e transmission. I just replaced the transmission with a 2006 4L60e transmission. The truck does not appear to recognize when it is in park or neutral, as it will not start with the key. I can go ...
...plugs(inside and outside the trans), torque converter, or the computer. On a 4L60E it is Inside the transmission. Remove the oil pan and it is bolted to the bottom of the front pump, (near the front ...
...4L60e automatic transmission with a 2006 transmission. Upon completion of installation the truck appears to not recognize being in park or neutral, as it will not start with the key. I can however go ...
4l60E tranny. My truck will run fine until I run into water where it splashes up, but not enough to get into my engine bay. The engine will have no problem shifting to 1st but then it will rev and not
...4L60E/4L65E To Remove: Remove or disconnect the following: Transmission fluid Transmission oil level indicator tube and seal from the transmission Plug the oil level indicator tube opening in the ...
...4L60E/4L65E/4L70E automatic transmission may experience a condition of slipping, late or missed shifts in 2nd 3rd and 4th. An internal transmission disassembly may reveal a 2-4 band and or a 3-4 ...
738 questions posted
Usually answered in minutes!
538 Questions
471 Questions
356 Questions
231 Questions
97 Questions
