2003 Chevrolet Avalanche "knock sensor location engine" Questions

knock sensor on the engine need picture or engine diagram Hi!! The Knock Sensor is located on the right side of the engine block, right below the exhaust manifold. See #7 on picture below: Good Luck!!

02 avalanche 5.3 code po327 just change knocks sensors and wires n light is back on locate and replace ecm module(engine control module) Have not got data for your model for location

where is the knock sensor located? check engine light is on it is located under the intake manifold

KNOCK SENSOR CIRCUIT LOW INPUT BANK 2 CONDITIONS, POSSIBLE CAUSE KNOCK SENSOR FAILED, CODE P1875 4WD LOW SWITCH CIRCUIT MALFUNCTION CONDITIONS FOR TRANSMISSIONS 4L60E 4L80E, POSSIBLE CAUSES 4WD SWITCH

...knock sensor is under the intake manifold. The good news is this is a fairly easy fix as far as removing the intake goes. I assume you have the 5.3 engine? In the many cases where i have replaced the ...

your knock sensor which is located under your intake manifold. There are two under the intake. I would recommend replacing both, they are 40 dollars a piece usually plus the labor to remove the intake

...engine does not sound like one with with no oil pressure; AKA no knocks or ticking since you have no noises or ticking at all, you likely have a failed oil pressure sender/sensor. It is located right ...

...knock sensor on 2003 honda crv On a 2003 Honda CR-V, the knock sensor is located on the engine block, near the oil filter. It is located on the driver's side of the engine, between the engine block ...

...knock sensor in a 2006 pt cruisor located? The knock sensor is located in the lower part of the engine block. Tighten the knock sensor to 19 N.M (14 lb ft) Knock Sensor (3.4L VIN E)On lower left rear ...

knock sensor locate and how hard is it to replace? its a vq engine for an 97 maxima se. Your knock sensor is located Under the hood, center, front engine area, below intake manifold, mounted on block.