...serpintine belt on my 01 cavalier my old belt have cracks in it there is a tensioner on the belt drive. if you look you will see a hole that you can fit a 3/8" breaker bar into and pull. this will ...
...serpintine belt. Just to make sure you have the right part (belt Tensioner), If you push and pull on the serpentine belt, look for the pulley that moves with the belt. That will be the Belt tensioner ...
Question about Chevrolet Cavalier
...serpintine belt in my car. Not sure how to get to them to replace them HELP!!! First thing I would do is get your supplies. Antifreeze, lower radiator hose, 2 new hose clamps, serpintine belt, and I ...
Question about Chevrolet Cavalier
...serpintine belt use a large screwdrive or equivlent to hold the pump pulley and loosen all of the bolts holding the pulley on the pump. After all are loosened then remove from the pulley and remove ...
Question about Chevrolet Cavalier
...serpintine belt how do I relieve the tension how do I take off a bad serpintine belt On belt tensioner pulley fit a wrench on the bolt that holds pulley, turn clockwise to release tension, hold and ...
...serpintine belt diagram need diagram to put serpintine belt for the most part there is a diagram under the hood showing you how the belt goes back on what i do is draw me a diagram before i take the ...
serpintine belt or alternator belt. If it is a serpintine locate the tension pully(the one that doesn't look like it does anything) place a wrench over the pully bolt and pull while removing the belt.
serpintine belt "all in one belt" that snakes around all the pulleys,thus the serpintine..name..anyway if it is slipping most likely the belt needs replacing or the idler itself is bad..neither can be
serpintine belt squeal i have a 2000 Ford Focus 4cyl 2.0 split port and the serpintine belt has started squealing loudly all the time now. If i rub a little bar soap on the belt it stops squeaking for
...serpintine belt where's the adjustment to remove old belt? There will be a slack adjuster, a flat roller you loosen off it will most likely be spring loaded that will allow you to remove and install ...
1,464 questions posted
Usually answered in minutes!
1,849 Questions
1,641 Questions
1,529 Questions
1,438 Questions
1,339 Questions