1996 Chevrolet K1500 "silverado set timing" Questions

...set the timing on a 1988 chevy silverado with a 350 small block,tune port injection, and electronic ignition. Thankyou for your help. On that set up the computer mainly sets your timing. It reads the ...

...Silverado Timing I have a 96 Chevy Silverado that the distributor was replaced on. I am trying to adjust the timing using an ElmScan 5 scantool. The software gives me a timing advance option but not ...

...silverado 1500? Make sure air presure in tires is corect.Timeing is set proper.And change the oil and use synthetic blend first time and full synthetic from then on .You will see a change for the ...

...silverado 3/4 ton 8.1 gasoline 454 vortec not show any timing advance data when running after replacing engine? After replacing the 8.1 vortec 454 in 99 3/4 ton chevey dually with a rebuilt 8.1 it ...

...set the timing on a 1996 Silverado Z71? I want to know how I can set the timing on my 1996 Silverado Z71. An OBDll compliant scan tool is required for this procedure. With the ignition off install ...

...silverado Z71 had someone work on the distibutor and I'm assuming the put it a little off. How can i set the timing Okay dude here it is. Sounds like you are off a tooth. the timing is controlled by ...

...silverado, 7.4 litre engine and the specifications for tuning is not under the hood. I do not know what timing marks should be. Please help. The distributor was removed and repleced to TDC markings ...

my 1998 chevy silverado k1500, cranks but doesnt always start unless primed and then runs smoothly. after it has been running for a while and i turn it off sometimes it will start but mostly takes ...

...silverado it blew the head gakets so i repaced them now the idle is at about 1700 and its running rough its giving me a code #1345 camshaft to crankshaft position correlation fault any sugestions ...

...silverado with the 305 engine and it's not getting fule for some reason i checked the relay even put a New one in and still the truck will not start could that be my pump or something else going ...