1996 Chevrolet K1500 "loose torque converter bolts" Questions

...loose but the transmision wont move 89 chevy 1500 4x4 Its either Stuck on the alinement pins, or remove starter,,,,, also there are a couple of the bolts that have nuts holding on wires,,,remove the ...

...torque converter bolts - They are most likely still ijn the bell housing.  You will find them when you take the transmission access plate off the bottom of the bell housing...NOTE"  They ...

...loose, but I can't figure out how to get it out. It seems to be trapped by the frame, exhaust, oil pan, etc. It won't fit out of any of the holes. Any help????? you have to Remove Torque Converter ...

Torque Convetor BoltsTo the Fly Wheel have some how Broke Off or Have ALL Come Loose .But Really that Just don't Seem Possible,If it was Going into Gear like the Last Time You Drove It.Or its Possible

...loose due to not tightening the mounting bolts for the torque converter enough or the mounting bolts for the flywheel/ring gear itself. Both of these situations will give off a sound similar to that ...

and vibration in overdrive. Could my torque converter bolts be loose. Yes, your torque converter bolts could be loose. On the other hand, there could be something wrong with the tranny or your starter

i think my torque converter bolts are coming loose is there a access panel to get to the bolts There is always a panel that can be removed to gain access to the torque converter bolts.

...get forced to one side of their hole. I suppose it is also possible to have the flywheel bolts loose, so if you do not find loose torque converter bolts, keep digging. ...

...back in the torque converter? Torque converter bolts come loose? Was the torque converter moved any or not put in all the way? I would also check to see if the transmission has any fluid

...Have you looked for loose bolts between flex plate and torque converter?This happens quite often as many shops don't use a torque wrench to install these bolts. Other loose sheet metal or