and set the timing. Why will it not start check crank position sensor. check cam position sensor. Have the fault codes read for fault. Check key battery is not flat causing the immobiliser not to work
...immobiliser when i called them. 1-insert and remove key from ignition two times 2-close and open driver door two times 3-insert and remove key once from ign. 4-close and open drvr door twice 5-insert ...
...immobiliser is de-activated only with the Key Fob. I've replaced the batteris in the Key Fob / remote, and it appears to work, but the car just will not register anything from Fob... I want to sell ...
Question about Cars & Trucks
...is not stopping it from cranking but is stopping it from firing. run the fault codes as the immobiliser is not the only thing that controls the spark it could be a flat battery in the key
Question about Cars & Trucks
key batteries will be half the problem. Because the immobiliser cannot read the fob keys it probably put the system into anti theft mode as well. Replace the fob key batteries and if it still will not
...key immobiliser dont work immobiliser on key dont work battery on car was flat for a while car is running but alarm does not switch off Lock and unlock the drivers door with th key. if factory ...
Question about Renault Cars & Trucks
items that will not allow the car to start. The immobiliser has to recognise the key for it to work so if the key battery is flat it will not start. run fault codes to check cam./crank position sensor
...200 immobiliser not working, unable to start engine, but interior light and radio still work. Is the key fob battery flat? If so fit new CR2032 and re-sync to car by pressing lock 4 times in ...
Question about Hyundai Cars & Trucks
...ON MY HYUNDAI ACCENT MANUAL 2002 YR CAR...CAR WONT STARTING..HELP ME HOW CAN I HELP FIX IT? check the fob key battery and replace if flat. reset the immobiliser using a scanner to reset the CPU ...
Question about Chevrolet 1500
lights are on and the car alarm is coming on. Apparently there is a chip within the key fob? How do I reset the immobiliser? try using a scanner to reset the CPU program which includes the immobiliser
1,180 questions posted
Usually answered in minutes!
878 Questions
754 Questions
575 Questions
561 Questions
414 Questions