1996 Chevrolet K1500 "change turn signal switch" Questions

turn signal filaments have power. I would try changing the bulbs and if that doesn't work have an electrical shop trace the wires and check for power on the brake light circuit in the back. you have a

...change. What could it be? It could be a bad multifunction (turn signal) switch. The way that switch works, it is possible that it can turn on the front blinker and not the rear one. It also cancels ...

... or have any additional ideas? Will the hazard relay mess with the two main brake signals yet leave turn signals, etc intact? change the bulbs if not there a switch is on the brake peddle it could b ...

...I have breaks and turn signals a little confused I changed the headlight switch already check tail plug wiring- factory installed even if you don't use it- can be shorted and cause simular ...

...turn on I change the brake switch,relay check all the fuses and still my brake light wont work.....everything else work except that sometimes my right rear flasher wont work. Hazard works but when i ...

turn signal/no rear t/signal. Now t/signals work but flasherstat stays on from 1min to indeffinently. Flasherstat stops momentarily when brakes applied. I was having a similar problem due to a damaged

i turn my left signal on, but both sides flash. we changed the flasher. but still doesnt work right. what next? multi-funtion switch ....if it has tilt wheel u might move it up or down to help comfrim

...change the ignition switch in my 1990 Chev 1500. Key is stuck in on position in ignition...Its a manual trans so I just put it in gear and let off clutch to kill engine and unplugged battery to ...

...turn signal stalk). They are common on this truck, and I find myself changing them all the time. I wouldn't hesitate to start by replacing the combo-switch first, as if it hasn't failed yet, it will. ...

...change my ignition switch, how do i go about doing this? its on a 89 chevy extra cab truck You need to remove the steering wheel. Then remove the lock plate. Then unbolt the turn signal switch and ...