...idle control motor and correcly set the T P S. when you put new idle speed control in you have to adjust it to make it work.if all is good. your throttle valve sticking open.due to gum and carbon ...
...have to replace the idle speed control sensor this should solve that problem.youll have to get one for the intake that you put in the car(one for the year and engine size of the replacement
...idle air control is looking for base idle. throttle body base idle plate is dirty with carbon. cleaned out throttle plate with carb cleaner and tooth brush. use rags to catch black carbon.open ...
...idle control motor interiors. I have had the plugs, wires and the distributor checked. I checked for vacuum leaks and found none. 17-21 lbs. of vacuum. Four professional mechanics and two jacklegs ...
...idle air control) sensor and check the hoses going to the MAF (mass air flow) sensor, i have found both causing me problems with erratic idle. the IAC was totally gunked up with carbon on the pintle ...
Question about Chevrolet Corvette
...idle control valves etc... Finally if you've checked all that, then I'd opt for a new optispark (the term used for the distributor on these engines), and that's quite a labor intensive job.... and a ...
idle control,map sensor and one of the knock sensors and the problem is still there and i get code 43 which is supposed to be knock sensor or electronic spark control No...Inside the bore of the unit
1994 Corvette Auto trans. - car has been in storage for 9 mos. - runs well except it wants to lurch forward while stopped at a stop (in gear). sounds like a sticky idle air control valve
Need to know where the idle air control valve is on a 1991 Corvette 350. it is located in the throttle body
keeps shutting off when cold and surges when hot check idle speed control valve switch
252 questions posted
Usually answered in minutes!
181 Questions
156 Questions
142 Questions
137 Questions
143 Questions
