1992 Chevrolet Corvette "92 truck intake manifold" Questions

Ad

92 Corvett if the moisture goes to your distributor which is sitting right under water pump,or the vacuum line that goes from it to intake manifold is plugged and not sucking moisture and some harmful

Ad

...92 vette didn't start, (didn't turn over) at all. All the lights and everything else was normal as with a passerby's help, I push-jump started it, and was able to get home. Is ...

Ad

intake manifold of a 92 buick century 3.3l V6??? I blew a radiator hose and over heated the engine in my 92 buick 3.3l V6 causing the intake gaskets to fry and shrink. I pulled the intake manifold off

Question about Chevrolet Corvette

1 Answer

92 delta 88 3.8 trans fluid leaking into air intake manifold, connecting tube, and air filter replaced faulty trans modulator, which allowed trans fluid to enter manifold, connecting tube, saturate ...

...92 crown vic - the temperature guage on the dash is not working. where is the sending unit located? The temperature gauge sending unit is located in the front section of the intake manifold, just to ...

92 geo metro is not missing but the motor is shaking really bad in park and in drive and it has lost a lot of power what is wrong with it. Sounds like a vacume leak on the intake manifold. sounds like

...92 4runner is very sluggish in low rpms. Once it hits 3200-3500 rpms it runs great with ample acceleration. I recently replaced the air intake manifold gasket and a stripped screw that holds the ...

...92/3 chevy blazer v6 vortec They are marked on the intake manifold. They are raised numbers at each intake port. If its a V6 or V8 its the drivers side, furthest to the front of the engine. Hope that ...

...92 ford f150 pickup 4.9 l there is minimum voltage being recorded on the computer that oreilly hooked my truck up to. it read dtc 327 egr valve position circuit below minimum voltage evp/ept circuit ...

location of oil pressure sensor on a 92 5.7 liter v8 If its a Chevy truck with a 5.7 engine the oil pressure sensor should be on the back of the intake manifold near the firewall.

Not finding what you are looking for?
1992 Chevrolet Corvette Logo

252 questions posted

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...