1991 Chevrolet C1500 "play tower" Questions

...turned a bit back, so when slides into position, rotor is pointing directly to #1 plug tower. Keep playing with it until you get it right. Good

...would cause a knocking noise is a worn out shock bushing as the wheel goes up and down there is play on the shock to the shock towers from worn out bushings. Recap, check the CV Joints for ...

...rack should be disconnected and each Strut checked separately. You can also believe that Alignment plays a factor in steering effort. You model may need all four wheels aligned. Please rate my

...tower c causing wheel to move a tiny bit - all pretty easy to diagnose- there should be no play at all or all of these- happy trails fix it fast- front end is very important for steering and control, ...

tower on firewall on passenger side. You'll see a connector attached to a 1-1/2"x 3" rectangular piece that is inserted inside firewall. Pull it to one side then pull out. You may have to play with it

play here on a '98 Explorer? Thanks, Owen Have the shock tower check for the noise. The upper bearing to the strut may be bad my wheel bearing was making noises like that on pass side it would only do

...play in the ball socket. It rocks one way on a left turn and another on a right turn. You did not indicate a 2 wheel drive or 4x4. Some of the strut towers have bearings on top. You should also check ...

...play or movement in any direction. any ideas? look at the rubber grommets and end rubber on the stabilizer bar .. also check the top of the strut tower (under hood). they sometimes rust out allowing ...

...and there is a shifter coupler.Look if it has a play (the plastic is worn out) or the little 3mm allen screw bolt is loose.If ok look at the shifter tower bushing. let me know ...

...play between gears if it is a floor shift lever , there is a pivot pin in the lever ball / box tower that comes loose and allows for loose selection on the end of the lever in the box there is a ...