Master cylinder problem or what I have to push the breaks all the way to the floor. Is that a power booster or master cylinder a bad power booster will cause a hard pedal, u have a master cylinder ...
firing order Firing order is 1-6-5-4-3-2. The front cylinders are 1-3-5 and the rear cylinders are 2-4-6
Need cylinder head and intake torque specs on a 1976 oldsmobile 455 1976 OLDSMOBILE TORQUE SPECS 455 CI cylinder head torque 85 ft/lbs 455 CI intake manifold torque 40 ft/lb Hope this helps
...cause? Check for brake fluid leak's at all wheel's. but more then likely it going to be your master cylinder, pump brake paddle up and hold with lots of pressure if paddle goes down bad master ...
paired cylinders missing after restart My 1990 olds 88, 3.8v6 runs great. Usually if I start and drive it runs fine, but if I stop and then restart 2 cylinders won't work. Before now it would clear up
...not start. Alternator and starter brand new. Any suggestions Greatly appreciated. Replace ign lock cylinder and chip key. The tiny anti theft wires have broken going to lock
...brake fluid go under the hood on the drivers side along the firewall you should see a cap on a cylinder this is the brake master cylinder.when you take the cap off look at it it will say brake ...
the keybroke so i changed the cylinder and key the key broke in the steering .so i changed the cylinder and key and car starts and shuts off is it the chip in the key i dont have alot of money so i ...
...may be air in the brake system. First thing to do is check the brake fluid level in the master cylinder reservoir, if it is low, check the entire system for a leak. You may have to remove the ...
i need to know what the part is called on the front driverside that all the brake lines run into it sounds like your describing the master cylinder master cylinder
36 questions posted
Usually answered in minutes!
91 Questions
76 Questions
67 Questions
53 Questions
45 Questions