1984 Oldsmobile Delta 88 "belt tension" Questions

Ad

Question about Oldsmobile Delta 88

1 Answer

tension on the belt. Depending on the location of the alternator, it may require you to work from the top of the engine or in some cases from under the car. Determine if any other belt is blocking the

Ad

Question about Oldsmobile Delta 88

1 Answer

tension up the ps belt, also the sit at bottom of the VEE. no one i ask understands its gotta ride the sides. Go to a place that sells goodyear belts. Find an old mom and pop auto parts store and they

Ad

Question about Oldsmobile Delta 88

1 Answer

...tension until there is like 1/2" to 3/4" deflection in the middle of the belt between two pulleys, and when running there doesn't appear to be a lot of play in the appearance of the belt while the ...

Drivebelt came off while on the highway (about 75 mph). Towed it home, went to replace belt and now both old belt (4 yrs old) and new belt (both 1025) are too long. Put on 1015 belt, topped off ...

Question about Oldsmobile Delta 88

2 Answers

1988 Delta 88 makes terrible squeking noises while turning, power steering fluid is ok - belt is shiny on top and has wear on tread side Sounds like you are in the right area. There is a good chance ...

Question about Oldsmobile Delta 88

1 Answer

squealing noise I have replaced the water pump, power steering pump, alternater, and all belts. I can't stop it from squealing check all pulleys. and also, check the air conditioner compressor. it may

...the large wheel coming out of the engine, passenger side, the wheel that powers the serpentine belt. One sensor is the crankshaft position sensor and the other is... I forget... crankshaft angle ...

Question about Oldsmobile Delta 88

1 Answer

...belt tension and slide the belt off the pulleys. On 3.0L (DOHC) engines, rotate the tensioner counterclockwise to relieve belt tension and slide the belt off the pulleys. To install:Install the drive ...

Question about Oldsmobile Delta 88

1 Answer

...tension of spring on tensioner. Remove pivot bolt, tensioner, and spring from front cover. Insert spring into the USED belt position on tensioner bracket (Fig. 4). Install spring, tensioner bracket, ...

...belt tension will occur. Pulley, Routing?Accessory Drive Belt 3.0L (2V)/3.0L (2V) FF Engine ItemPart NumberDescription 1 10300 Generator 2 6C348 Idler Pulley 3 3A674 Power Steering Pump 4 19703 A/C ...

Not finding what you are looking for?
Cars & Trucks Logo

123 questions posted

Ask a Question

Usually answered in minutes!

Top Oldsmobile Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you an Oldsmobile Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...