1992 Nissan Pickup "know power steering fluid contaminated" Questions

know what type of power steering fluid i need i would like to know what type of power steering fluid to use in my 92 nissan pickup, i know the truck actually only has power assist for the steering and

...power steering. do not know if the system was purged. what else could it be? rich 1993 chrysler fifth ave. 3.3 eng. Check the fluid for any contaminants and for proper level. Jack up the entire front ...

...power steering bottle. I replaced the oil after driving 200 km. Now its stiff at low speeds. Sometimes work perfectly and then almost nothing again. Anyone know what it could be?? Hi Theo, As you'll ...

...power steering fluid to go in the system?I don't know why the mechanics didn't figure it out the first time. If the power steering was ok before the brake job, I would suspect something went amiss ...

...know for sure is to look for a busted boot on the cv axle. The affected axle will need to be replaced. Check if this happens while at stop or while the car is running. If it happens on both instances ...

...power steering fluid product, but read that the seals expand when you use it, and that's how it stops (or slows) the leak. Will I "really" hurt my car if I use this kind of product? I'm on disability ...

...power steering fluid in where the brake fluid go's? You contaminate the whole system. They are not interchangable. They entire system has to be cleaned and bled. you will need to have it removed the ...

...power steering pump replaced, tie rod ends replaced, upper control arms replaced. I have yet to do the lower ball joints. the pump whines when at medium or high rpms. Hi Paul, How is the condition of ...

...power steering fluid in the master cylinder and it will make all of the rubber seals swell and lock the brakes up but usually only after the vehicle has been driven for a while and you can pull over ...

...know before they sieze until its driven unless when pushing the pistons back you notice they are hard to push back. first thing i would advise you to do is call the place where the brakes were done, ...