1996 Mercedes-Benz C-Class "wiper arm nut size" Questions

wiper control arm and cannot for the life of him figure it out how it comes off just wondering if anyone could help out Thanks in advance Most steering wheels are a "press fit", (very tight) but after

wiper arm on. Remove the plastic trim on the wiper arm base, and tighten the 12 millimeter bolt. Please advise if this helps. Yes, removing the plastic trim and tightening the nut worked for me. On my

...WIPER ARM. IT IS SOMETIMES COVER WITH PLACTIC COVER THAT WILL NEED TO BE REMOVED FIRST. THE NUT SIZE IS USUALLY A 13 OR 15 MM TURN THE WIPERS OFF. ADJUST THE ARMS TO PARK POSITION. THATS THE POSITION ...

...wiper arm are stripped, so you could probably lift the cover and snug the nut a bit to make it work again. If the splines are completely gone (usually in the arm) you can replace the arm with a junk ...

wiper arm hole is a fitted shape as is the post it mounts on. If you pop the cap off of the wiper arm at the connection point you will see a nut of about 1/2 or 9/16th size. Remove that and reposition

...wiper arms both sides are two nuts one on each arm ,reset the blades to where they should be on the park position then tighten these nuts and providing you have the right size blabes on then this ...

...wiper arm connects to it, you have a couple of options, one, replace the motor and the connection is part of it and you cannot just change that part, or two, check the wiper arm to see if it is just ...

...wiper arm ( it may need a bit of a tap to get it home) then tighten the nut up then this should work...hope that helps, if its the first senario, you might have to replace the mechanisum, which i can ...

wiper arms in place, I noticed both nuts were stripped. I am having problems finding the correct size nut to replace them. It required a 13mm socket to remove the nuts. They should be 8mm x 1.5 thread

...wiper does not work but the passenger does. at the base of the arm is a plastic cover over a nut. remove the nut and with a gentle rocking motion pull the arm off. inside the concave hole in the base ...