2003 Dodge Viper "sensor chrysler sebring 2007" Questions

...chrysler sebring is stuck in park when it is cold. Afrer driving for 20 minutes and or leaving the car in the sun all day, no problem. This is really for ycbsiiw: You might want to try sparying a ...

...sensor in a 2007 chrysler sebring 2.4 engine? Usually the crank shaft position sensor is located on the top of the transmission bell housing, on the back side right next to the top of the motor. Do ...

How do I find the location of the Intake manifold tunning valve position sensor switch 2007 Chrysler Sebring Most auto parts store will print the schematics off for you free of charge.

chrysler sebring and the air bag icon continues to stay on is this a sensor issue Have it checked right away by someone knowledgable with the system. Could be minor or major. It's a safety issue ,

...Chrysler is the crank sensor, won way to check is with a scanner, connect to dlc, and goin to live data stream and watch your rpm if you have no signal while cranking that's your problem,another ...

Where is throttle body sensor located on 2007 chrsyler Sebring 2.4L on side of throttle body.

...CHRYSLER - Intake Manifold Runner Position Sensor/Switch Circuit High Bank 1 Possible causes - - - Manifold flow valve harness is open or shorted - Manifold flow valve circuit poor electrical ...

...Chrysler Sebring won't Rev past 2000 rpm when pedal is to the floor. What could be my problem. Map sensor and connector are new. Also cleaned the throttle body and maf sensor. 2.7 and throttle body ...

what does red lightning bolt on 2008 sebring mean On my 2007 sebring 3.5. I just changed map sensor went rite off located on right hand side manifold

...Chrysler Sebring 2.7 will Rev 3 or 4 times in a row the pedal on the floor just idle at 2000 what's my issuw Map sensor and throttle body codes came up Leaking hose to Map or bad TPS, you can test ...