2003 Chevrolet S-10 "replaced door hinge pins" Questions

...door can move off the hinge so you can get the old brass sleeve out and replace it with the new one and slide the door back on and replace the pin. i would only do one hinge at a time and do the ...

...done, then you will want to take it to a body shop where they'll bend the necessary parts of the door. With worn hinge pins, the adjustment doesn't do you any good. Hope this is what you're

...have been replaced, use compression tool to reload the spring into the retainer inside the door frame hinge area. Rank amateur may be able to complete one door in half an hour by himself, easy

...door? I see no visible adjustments There are not adjustments.You have to replace the hinge pins on the hinges.You can get a kit of replacement pins and sleeves from the part stores.You will need a ...

...door hinge and bushing. do i need a special tool? thanks michelle I had an Isuzu with the same problem(they are the same car) have you made sure that the bushing is available,some hinges have hinge ...

...hinge pins on a 1994 chevy s10? Pretty basic. Just hold your door up with a floor jack or block of wood, bang the pins up, replace the bushings, and install the bushings and pins. Do one at a

door would close but I could almost see daylight through the seal. I noticed that my bushings were really worn on the top hinge. It may take a little work but this can be done with just 2 people. Just

the doors wont close correctly ck your door hinges, the are possibly worn out, they make kits with new pins and bushings, but get a shop to replace them.

...door hinge for 92 S10 pickup Most auto parts stores have hing pin replacment kits. they are easy to put in. you need one helper and a floor jack. i got mine at napa they had a KD rack with KD tools ...

...attached at the body. its probably the door hinge pins. use a floor jack to support the door. have it jacked up slightly to get the weight off the pins before removing. chevy should have a kit for ...