2003 Chevrolet S-10 "replace head gasket car" Questions

head gasket located on a 1999 saturn sl 1 The head gasket is in between the cylinder head and the engine block. The sly has a single overhead cam engine. This head is know for being porus and allowing

...head gasket blew and i need to replace it. I know that I need to replace the intake manifold gasket, valve cover gaskets, and probably the water pump gasket because they cant be put back on without ...

head and intake manifold to try gasket sealer then it's best to replace the gaskets. If it's leaking from the intake gasket you may be able to temporarily seal it with sealer but if the head gasket is

Head Gasket has most likely failed due to expansion and contraction of dissimilar metals. The Cylinder head is Aluminum and the Cylinder Block is Cast Iron. The Cylinder Head expands at a greater rate

replaced head gasket, will start and idol but replaced head gasket, will start and idol but will not rib up.acts like out of time,but is not.wires are not crossed. check fuel pressure

...head gasket or engine. If that's the case why no water or oil drip? how did it drive the 18ish miles after radiator blew? the head could be cracked also. check the oil if its milky then its the head ...

ok what do i do when i have anitifreez coming out my tail pipe and oil is milky is this caused by the head gasket Your head gasket will need to be replaced.

how to replace head gasket first sorry but good luck. a s 10 blazer is a hard one to do the head gasket in

head gasket so i tore down the motor to find oil leaking out of the last cylinder onto the exhaust, head gasket looked destroyed, is this com also not losing coolant and never overheats, runs like its

...down onto the pan after replacing the gasket. Gasket is not bunched or poking out anywhere, and there are no obstructions. turn the valve cover around and then try to place it on the cylinder