2003 Chevrolet S-10 "code communication" Questions

CODES U1016 & U1055 1999 S-10 2.2 BCM NOT COMMUICATING WITH PCM U1016 Loss of Communications with PCM U1055 Loss of Serial Communications for Class 2 Devices This is going to require special ...

...code, loss of communication with the vehicle theft deterrent module (BCM), try cleaing the code if it comes back on the next key cycle you are probably going to have to replace the BCM, (bod control ...

...communication once again you more than likely have an issue with your computer or electrical system. If you have a true obd1.5 system do not fret there is still hope :) Yes there are some obd2 ...

how do i check the codes on a 1993 s10 blazer 4.3 if you go to the auto parts store, they may sell a key that jumps out the dlc connector under the dash. the light will blink for the code.# There are ...

...code from the ECM for diagnostic purposes, the Assembly Line Communication Link (ALCL) connector, is used. The ALCL diagnostic connector is located in the passenger compartment. Terminal B of the ...

...side of the ignition switch, it's a very common problem for this year model If you have have a DTC code for some time, then there has been a problem with the transmission that may have started out

...module (BCM). The BCM will determine the validity of the passlock™ data. The BCM will send a code password to the vehicle/powertrain control module (VCM/PCM). When the VCM/PCM receives the ...

...one of the security resistors inside the passlock™ sensor will generate a unique passlock™ code. All 10 combinations of the passlock™ sensor have the same part number. However, you cannot ...

...code errors: The UO101 is a transmission communication error: poor communication to your transmission ECM / computer The UO105 is a fuel injection communication error: Poor communication to your fuel ...

...code out of scanning the Engine Control Module, you can bet that the Engine Control Module is not having a problem communicating. If it was, you would get a non-communication fault from your scan ...