2003 Chevrolet Corvette "remove bumper replace headlight bulb" Questions

...remove the bumper bolt that the hood rests on when it's closed. If I remember it's a 13mm wrench. manually open the headlight door and there's enough room to get in and replace your headlight bulbs. ...

...Remove front bumper COVER (not the bumper- the plastic cover) About 14 screws. Mostly on the underside, get a creeper, and a few on the top. Remove the (left or right side) Headlight assembly ( a ...

...remove the front bumper to take the headlight out. However if you remove the vertical philips/10mm bolt at the far back edge of the bumper and a few of the upper 10mm bolts on the bumper cover, you ...

...remove my bumper first. It seems a bit extreme to pull the bumper just to swap a light bulb. Is there an easier way? Sorry, this is one of those you have to feel for the socket to remove it. did you ...

bumper off. First remove all of the push pins that hold the air deflector on the bottom. Next remove the pushpins that hold the grille to the tie bar. Now remove the front fascia extension. Remove the

step bumper pad, the screws that attach the lamp to the bumper and remove the lamp assembly. Installation is the reverse of removal. Tighten the lamp assembly-to-bumper screws to 14 inch lbs. (1.6 Nm)

remove the plastic support piece that holds the bumper in place (two bolts). Pull the corner of the bumper down until you can locate the bottom bracket of the headlight assembly that is held by a 10mm

...the headlight in question, now you would have room to change the bulb without removing headlight • Removing the assembly: Remove the Facia and the bumper, and you can now easily remove the

...remove the front bumper facia hope this helps hope you have HALOGEN lights Seriously, I am sitting at a GMC dealership right now getting headlight changed. Who designs a car where u have to partially ...

...on 2003 Mitsubishi outlander to replace headlamps No. Remove the socket cover. Then remove the bulb. You have to remove the bumper to replace the entire headlight assembly, but not for just the ...