2002 Chevrolet S-10 "chevy 6 cylinder numbering" Questions

...chevy S10 vortex 4.3 4X4 I think on the 1999 V6 the firing order is 1-6-5-4-3-2. Stand with the engine pulleys and belts nearest to you. The cylinders are number as Odd and Even. The LEFT side is the ...

chevy s10 v-6? Oxygen sensors are numbered by which bank of cylinders they serve. Bank 1 is the left or drivers side bank of cylinders on the 4.3L which has the odd numbered cylinders 1,3, and 5. Bank

...6 do the wires go? on chevy 4.3 L Firing order 1,6,5,4,3,2. To find number 1 plug at distributor set timing mark to top dead center on compression stroke and with distributor cap removed rotor will ...

...order on a 1988 chevy s-10 2.8 v-6 redoing my timing The firing order is 1-2-3-4-5-6 -. Number one cylinder is located on passenger side front of the engine, and the distributor rotates

...6 1992 Chevy S-10 pick up. However, I don't know which piston (or port for the spark plug) is numbered 1-2-3-4-5 and 6? If I were sitting in the driver seat Which would be 1, then 2 and so on? # 1 is ...

chevy s10 pickup I apologize for the late response...Due to the bad economic situation this site has had a substantial (+50%) increase in the number of questions being asked in the last four months. I

...diagram for a 2002 Chevy V6 4.3L 2002 Chevrolet 4.3 liter V-6 VIN "W" Good luck (remember rated this). Hope this helps. ...

...chevy s-10 pickup 2.8 liter v-6 Crank the engine until the mark on the Harmonic Balancer lines up with the "0" mark on the timing tab and the engine in the number one firing position. This may be ...

...chevy blazer 4.3 vortec v6 in it after the original went out, i did a spark plug and wire with cap and rotor. All the 1996 parts were completely different than the original that i ended up gettin, so ...

...chevy S10 My apologies for the delay in answering this question. I realize it has been over 5-months since you posted your question. I just joined this site in Nov09 and I am providing free answers. ...