2002 Chevrolet S-10 "change cam sensor chevy" Questions

...cam sensor, and now change the ECM computer!! It will start but dies right after!! I could not find a ECM for my truck but a junk yard said that one out of a cavalier with a 2.4 would work ,so that ...

...change a cam sensor and if i do change it should i also tune it up? ty It's not too hard. It's mounted under the distributor cap, in the distributor, you'll need to remove the rotor and turn the ...

...cam sensor cause this problem? changed plugs, wires, cap and rotor button If you take coil wire loose from distributor cap and hold close to engine ground, engine cranking, does a spark jump? If it ...

FUEL INJECTORS FUSE.IF ALL GOOD.SCAN TO SEE IF CRANKSHAFT SENSOR WORKING AND CAM SENSOR WORKING.THEY CONTROL INJECTORS AND ENGINE TIMING.IF THEY GOOD.YOUR INJECTORS CONNECTORS HAVE ELECTRICAL PROBLEMS

...the crank and cam positions sensors are good. I have a 01' s-10 4.3; vortech 4300. Fuel pressure is good,fire is good. Only runs if i pour fuel into throttlebody. changed press. sensor what

...it a random misfire code? I am fighting this issue myself. My truck eats up the distributor gear and I get random misfire codes and Cam to Crank positioning sensor codes, all related to timing

...sensor Coil Spark plugs Spark plug wires fuel filter and battery. The fuel pump works fine and it rolls over. When it does start it will stall within 5 mins unless you keep accelerating. Can't find ...

...change fuel pressure switch, oil pressure switch, o2 sensor, map sensor, distrib cap, rotor, electric part on dustrib, check for 12v to fuel injector good, check ground good, fuses good, ecm swapped. ...

...cam sensor and running much much better, but still has p301code with slight miss when accelerating from stop...runs fairly well when on highway. Does anyone know how to stop the misfire and blinking ...

...change cam shaft sensor on 1997 1500 5.7 chev truck http://www.bing.com/videos/search?q=change+cam+shaft+sensor+on+1997+1500+5.7+chevy+truck&FORM=AWVR ...