1996 Chevrolet Corvette "oil pressure sending unit" Questions

oil pressure gauge reads 80(pegged),,oil tepm is 207....car runs great it is probably the oil sending unit if you have access to a direct reading oil pressure gauge put it on and if oil pressure is ...

oil pressure gauge it fluxuates from low to high tripping the service engine warning and the red light the car has a good level of oil and all other gauges are functioning fine im thinking oil sending

oil pressure gauge reads 80 lbs display at 130 where is the sending unit and can I change it myself If they haven't moved it it should be behind the back of the intake manifold. Only other place I'd ...

...oil pressure gage read 0. my oil pressure temp. stated low, and my oil pressure red light came on. What should I check first? And where do I check to see if I have oil pressure with a gage? the ...

...oil pressure sending unit The sending unit on these vehicles also act as a back up power supply of the fuel pump . You had also better check the fuel relay its located inside of the glove box . Its a ...

...oil pressure sending unit. I would get a test light and test the oil pressure sending unit, the inline fuseable link and the relay. If still no power check the connection at the pump and then work ...

...oil pressure is at 97psi at idle My oil pressure shows 97psi at idle.can i change my oil pressure sending unit on my 02 corvette without taking the top of the engine apart? If so, how? Can i drive it ...

oil pressure guage bouncing from 0 to 80 and back 1999 Corvette Replace the oil pressure sending unit. Wait til you see where it is! Almost impossible for the average guy to do.

low oil pressure lt1 You have verified this with a mechanical test gauge at the oil pressure sending unit port?

oil gauge pegged oil gauge down when car off,but when you turn it on the oil gauge is pegged until you turn engine off Oil pressure 'sending unit' is bad. It needs to be replaced.