1992 Chevrolet S-10 "serpentine" Questions

Broken belt on 1992 Chevy S10, 4.3 liter, 6 cylinder. Could it be any other belt other than serpentine? Money is tight and I want to know if it could be any other belt than the serpentine. I removed ...

serpentine belt diagram for a 4.3 engine serpentine belt diagram for a 4.3 engine if you buy your belt from Autozone the belt routing is on the package

serpentine belt HOW DO YOU CHANGE THE SERPENTINE BELT ON A 98 BLAZER? if you dont have a belt diagram under hood draw a picture of how the belt runs around the pulleys. then put a scoket on tensioner ...

1988 Chevrolet P20 step van 6.2 diesel. Serpentine belts diagram for the alternator and power steering. There are two belts. I need the diagram please. Question edited for clarity. Does it look like ...

1993 Chevy S10 Blazer Serpentine Belt replacement Need help replacing serpentine Belt on my 1993 Chevy S10 Blazer PLEASE!! You use a breaker bar to move the tensioner, remove the belt and use the ...

serpentine belt replacement how do i loosen the serpentine belt on a 1992 chevy astro van? know need to loosen the tensioner pulley but i must be doing it wrong because it's not working, cant loosen ...

...stops completely. Please help, I think I will lose my mind very shortly. Thank you. Remove the serpentine belt and check the pulleys on the front of the engine. There may be a bad idler pulley

replaceing serpentine belt and need slack on tention how do you I am replacing the serpentine belt and having some difficulties with how it goes on and how to get slack Under the hood on the radiator ...

severe whistling noise at idle,acceleration. I first replaced the pulley off of the serpentine belt. When i check the tensioner is was a lot of free play in it. so i purchase a new tensioner and ...

do i need a special tool to install a serpentine belt on a 1988 s can't get the tensioner to move back far enough to get the serpentine belt on the alternator pulley. use a standard 3/8 inch ratchet ...