1992 Chevrolet S-10 "remove interior 3rd door panel" Questions

...3rd door latch. I took my seat balts loose removed the door panel,also removed the plastic latch yoy use to open door, the top latch was alredy opened and I put a needle nose vise grip on the lever ...

...interior panels and the latch is the problem. how can i open the door to be able to replace the latch? Same problem here. I finally got it after soaking the bottom latch with WD40 for a week. I ended ...

...interior-door-panels there is also an older Fixya thread here talking about removing the panel How do remove the drivers side door panel on an aztek Depending on how much of a hurry you may be in, ...

...interior door handle. Remove the cables that operate the door lock, and opening mechanism. No tools are required for this step. Now you have the metal door panel, which is secured by 11-12 ...

...remove the interior door handle by pressing the door panel in and prying out the C-ring retainer clip remove the lock slide switch bezel with 1 screw, then insert a blade on the bottom left of the ...

...interior lights, or the radio. The Fuses are generally located in either of 3 places: 1. When you open drivers door - on the side of the dash a panel can be removed., 2. Just directly under the ...

...interior trim panel. *Second, use a small flatbladed tool to remove that access plug and expose the hole. *Third, look through the hole and push on a silver lever located on the right to unlock the ...

...remove the trim panel to get at the duct. It turned out there wasn't much holding the duct in place and I was able to loosen it enough to get the old seat belt spool out and the new one bolted in. ...

...remove the interior door panel, look around the sides and bottom edge for any screws , remove these , there will also be screws holding on the door handle , door pocket etc ,once you have removed all ...

...interior buttons....all to no avail :-( Could it be a burned out fuse or a sequence of buttons accidentally hit on the remote devise ??? Your service and insight is GREATLY appreciated. Respectfully, ...